- Home
- Commercial
- Industrial
- Industrial Products
Industrial Coatings Products Developed By Rhino Shield For Superior Performance
Rhinopoxy
RHINOPOXY is a two-part, water-borne epoxy. Unlike traditional epoxies, this water-based epoxy is eco-friendly, low odor, and easy to apply. RHINOPOXY provides a high-gloss, hard finish that can protect a wide variety of surfaces. RHINOPOXY is tintable and benefits include chemical/solvent resistance and excellent hide.
RHINOPOXY should only be used in covered spaces and should not be applied to areas with direct sunlight exposure. RHINOPOXY is ideal for surfaces continually cleaned or exposed to water. Common uses include pipes, tanks, shower stalls, locker rooms, concrete walls/floors, hospitals, restaurant kitchens, packing plants, car wash bays, restrooms, schools, railings, manufacturing equipment, and parking garages.
Ideal For Use In:
- Industrial
- Interior
- Floors
- Walls
- Tiles
- Driving Surface
Benefits:
- May Be Used in Areas of High Traffic
- Seals Out Water
- Withstands Thousands of Cleanings
- Beautiful Gloss Finish, Endless Color Options
- Highly Durable
- Easy to Apply
- Able to be Driven On (Hot Tire Pickup)
- Corrosion Control
Data:
- FINISH: High Gloss
- COLOR: Tintable
- VEHICLE TYPE: Epoxy / Amine
- SOLIDS BY WEIGHT: 50% +/- 2%
- SOLIDS BY VOLUME: 40% +/- 2%
- VOC (averages): 1.87 lbs/gal, 224 g/liter
- SPREAD RATE: 200 to 300 sq.ft./gal
- DRY TO TOUCH: 4 hours
- RECOAT: 12 to 24 hours
- CURE TIME: 24 hours
- CURE TIME TO WALK: 36 hours
- GALLON WEIGHT: 10.1 lbs +/- .3 lbs
Rhino Rust Control
RHINO Rust Control is a 100% solids epoxy primer designed to prime and encapsulate rusted metal surfaces. This 100 % solid, two-component epoxy seals out air and moisture from the surface while providing a strong bond to ferrous metal surfaces. RHINO Rust Control is a great alternative when sandblasting is not practical or cost-effective. Rust Control doesn't shrink resulting in very low surface tension, high spread rates, and great edge retention for metal edges and corners. This primer is typically used as part of a two or three-coat system utilizing RHINO URETHANE as the protective finish coat.
RHINO Rust Control provides exceptional adhesion to rusted, aged, and corroded surfaces. Specifically designed for metal and rust when blasting is not practical nor economically justified. The priming system seals and unifies the substrate surface providing a paintable surface.
Overview:
- Commercial
- Industrial
- Roofs
- Rust
- Walls
- Accepts Most Topcoats
- Numerous Metal Surfaces
Benefits:
- Great Adhesion
- Encapsulates Rust
- Low Surface Tension Curing
- Cost-Effective
- Great Alternative to White Metal Sand Blasting
Data:
- COLOR: Off White
- VEHICLE TYPE: Epoxy/Amine
- SOLID BY WEIGHT: 100%
- SOLID BY VOLUME: 100%
- VOCs (Average): Zero
- SPREAD RATE: 500 to 600 sq ft/Gal
- RECOAT: Minimum 12
- GALLON WEIGHT: 8.9 +/- .2 lbs. per Gal
- PACKAGING: 2 and 10 Gallon kits
Rhino Urethane
RHINO TWO-COMPONENT URETHANE is a high gloss, acrylic polyurethane coating. Comprised of high solids, this two-component urethane coating provides superior weathering and high-quality color retention. It can be tinted to virtually any color. RHINO URETHANE is classified as an industrial urethane coating, designed for harsh environments. Additionally, it offers outstanding resistance to acids, stains, and chemicals. RHINO URETHANE is a flexible coating that maintains durability with structure movement. Available in both colored and clear formulas
Use RHINO URETHANE as the finish coat on properly prepared interior or exterior surfaces including: Bridges Block Walls Rail Cars Railings Steel & Concrete Tanks In addition, RHINO URETHANE offers Graffiti Removal of spray paint (100% removed with Ketone solvent.)
Overview:
- Commercial
- Flexible
- All Substrates
- Water Sealing
Benefits:
- Superior Longevity and Warranty
- High Color Retention
- Great for Harsh Environments
- Acid, Chemical, and Stain Resistance
- Flexes with Structure Movement
- May Be Tinted to Any Color
Data:
- SOLIDS BY WEIGHT: 73% +/- 2%
- SOLIDS BY VOLUME: 64% +/- 2%
- VOCs (Average): Mixed; 336 grams/Liter
- GALLON WEIGHT: 10.4 lbs +/- .2 lbs
Performance And Testing
| Property | ASTM Test | Result |
|---|---|---|
| Accelerated Weathering | G154 | No change - no cracking, peeling, softening |
| Moisture Resistance | D4585 | No change - no fading, blistering, cracking, delamination, softening |
| Salt Tolerance | B117 | Rated 10 (best) |
| Corrosion Scribed Test | D1654 | Rated 10 (best) no mean creepage |
| Exposure Test | Softening | Cracking | Crazing |
|---|---|---|---|
| NaOH Caustic Soda | None | None | None |
| Elongation Retained | None | None | None |
| HCI 36.6% (Hydrochloric Acid) | None | None | None |
| 98% Concentrated Sulfuric Acid | None | None | None |
Rhinopoxy Ultra
RHINOPOXY ULTRA is a two-part high gloss epoxy that offers beauty and protection for the harshest environments. It is a true immersion epoxy that can be used directly on metal or as a tie coat in outdoor projects. It is ideal for pipes, high-use railings, and perpetually wet environments. RHINOPOXY ULTRA offers excellent resistance to chemicals, corrosion, and severe environments.
RHINOPOXY ULTRA should only be used in covered spaces and should not be applied to areas with direct sunlight exposure. RHINOPOXY ULTRA is ideal for surfaces continually cleaned or exposed to water. Common uses include pipes, tanks, shower stalls, locker rooms, concrete walls/floors, hospitals, restaurant kitchens, packing plants, car wash bays, restrooms, schools, railings, manufacturing equipment, and parking garages.
Overview:
- Pipes
- Industrial
- Interior Tanks
- Floors
- Walls
- Tiles
- Railings
- Driving Surfaces
Benefits:
- May Be Used in Areas of High Traffic
- Seals Out Water
- Withstands Thousands of Cleanings
- Beautiful Gloss Finish, Endless Color Options
- Highly Durable
- Easy to Apply
- Able to be Driven On (Hot Tire Pickup)
- Corrosion Control
- Fully Immersable
Data:
- FINISH: Semi-Gloss
- COLOR: Tintable
- VEHICLE TYPE: Epoxy/ Amine
- SOLIDS BY WEIGHT: 74% +/- 1%
- SOLIDS BY VOLUME: 60% +/- 1%
- VOCs (Average): 3.2 lbs/gal, 380 g/liter
- SPREAD RATE: 200 to 300 sq.ft./gal
- DRY TO TOUCH: 7 hours @ 80°F, 40-50°F; 2nd Day
- RECOAT: 50°F: Overnight
- GALLON WEIGHT: 10.6 lbs +/- 2 lbs
